Thanks Anoop Mathur and team for inviting me to speak at the CIO Crown event. I received many requests for the presentations I used during this session. So here they are.
I conducted two sessions. First was an introductory session consisting of practical concepts for effective utilization of these technologies. Then I conducted a survey with the CIOs present at the conference and presented the summary in the second session. I recorded the video only for the second session.
Download Part 1 (500 KB)
Download Part 2 (400 KB)
Download Part 2 Video (84 MB)
Do post your comments or queries here. Enjoy!
One precaution you must take while presenting is to check if the projector lamp is set to maximum brightness. Usually all projectors have two settings: Standard (or Normal) and Eco. The Eco mode shows dimmer image and saves energy. Make sure you set it to Standard mode for audience size of 10 or above.
While conducting a session at Delhi VAT department, I came across a Sony projector which had THREE settings: High, Standard and Low. Factory setting was Normal. I changed it to HIGH and got brilliant display. There were 60+ attendees – so this brightness boost was most useful.
Moral of the story: Reach early and check the lamp mode settings for EVERY projector you come across.
This feature has been there for over 18 years. But only with 2013 version did it become easy enough for everyone to use it. You will need it someday – read this and be prepared.
Estimated reading time 3 min.
I wrote many articles recently about using ZOOM while presenting. I originally thought I will write only one article, but ended up writing 6.
This KNOWLEDGE PACK will guide you to the right article, depending upon what you need.